Compactflash Master/Slave Jumper Settings (Jp3) - Advantech UNO-2050E User Manual

A.8 CompactFlash Master/Slave Jumper Settings (JP3)
The CompactFlash interface uses a primary IDE channel, which could be
set as the master or slave device by changing the setting of JP3.
Master Device: (Default)
JP3
Slave Device:
JP3
UNO-2050E has one internal CompactFlash card slot and one external
CompactFlash card slot. Internal CompactFlash card slot supports Com-
pactFlash type I (3mm thick) only and External CompactFlash card slot
supports both Type I and type II (5mm thick) cards
A 128 MB CompactFlash card is equipped in the UNO-2050ECE with
Windows CE .NET OS. For UNO-2050E, there is no CompactFlash card
on the slot. UNO-2050E also supports IBM Microdrive storage device,
which is an ultra-miniature hard disk from IBM that was introduced in
1998. The Microdrive is built into a Type II CompactFlash form factor.
A 1GB CompactFlash card is equipped in the UNO-2050EXP with Win-
dows XPe OS. For UNO-2050E, there is no CompactFlash card on the
slot. UNO-2050E also supports IBM Microdrive storage device, which is
an ultra-miniature hard disk from IBM that was introduced in 1998. The
Microdrive is built into a Type II CompactFlash form factor.
37 Appendix A