Table of Contents
Advertisement
5.4.4
Setting the start up pressure
Right valve
1/4 turn
Natural gas
Propane
If necessary, the start-up pressure can be set on the right valve (1st
stage) using a flat screwdriver.
In the factory, it is set to maximum.
To modify this setting, it necessary first to remove the protection
using a screwdriver (1/4 turn).
Start-up pressure
Natural gas H
Propane
5.4.5
Attaching the label
Affix the label which indicates for which type of gas the boiler is fitted
and set.
22
Recommended position
11 mbar
max
C
10 mbar
(1/4 turn)
Left valve
The progressivity of the left valve (2nd stage) is always set to
"Minimum" (8-12 sections).
No setting is needed on the left valve on a 14-element boiler.
Operation of the progressivity screw setting
Pressure (mbar)
Time (s)
GAS 360 S
04/01/11 - 300005180-001-C
Advertisement
Table of Contents
