Checking And Maintenance; Checks; Checking The Ignition Burner; Safety Devices - REMEHA GAS 360 S Installation And Service Manual

Gas-fired boilers

Hide thumbs Also See for GAS 360 S:

Table of Contents

7 Checking and maintenance

Make the following checks at least 1 time a year:

- Checking burner safety

- Checking the safety thermostat

- Checking the downdraught thermostat

7.1.1

Checking the ignition burner

Check the position of the ionization probe 1, the ignition electrode

gap 2 and the position of the flame diffuser 3 in terms of the sizes

indicated on the drawing (required in the event of heater

malfunction).

7.1.2

Safety devices

Check the safety devices (particularly the valve or safety unit),

referring to the instructions provided with these components.

7.1.3

Water level

Regularly check the level of water in the installation. Top it up, if need

be, avoiding the abrupt input of cold water into the hot boiler. If this

operation is repeated several times per season, locate the leak and

repair it.

Do not drain the installation, except in cases of absolute

necessity. For example: Several months' absence with the

risk of ice in the building.

04/01/11 - 300005180-001-C

GAS 360 S

Table of Contents