Table of Contents
Advertisement
Configuration Commands
User Manual
10 Configuration Commands
In This Chapter
Info (Information) ................................................................................... 75
Status .................................................................................................... 77
Common................................................................................................ 79
Logging..................................................................................................97
Cellular .................................................................................................. 99
The configuration commands (AT commands) in this chapter are arranged
according to their placement in AceManager.
Note: Some commands can only be configured using a terminal emulation and typed AT
commands. Some commands also require PassThru mode.
Tip: You can use a fully qualified domain name instead of an IP address for most configuration
options calling for an IP address if your RLXIC-EH is configured to use DNS. DNS settings
frequently come directly from your cellular provider while your RLXIC-EH is registering on the
cellular network, and receiving its IP address.
10.1
Info (Information)
The commands in the "Info" group have read-only parameters. They only provide
information about the modem. Some of the information displayed in this group
does not correspond directly to AT commands.
ProSoft Technology, Inc.
May 29, 2009
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
RLXIC-EH ♦ Intelligent Cellular
Page 75 of 111
Advertisement
Table of Contents
Need help?
Do you have a question about the RLXIC-EH and is the answer not in the manual?
Questions and answers