ProSoft Technology RLXIC-EH User Manual page 59

Data Communication and Host Modes
User Manual
7.5.1 Configuring Keepalive
In AceManager, the Keepalive settings are part of the O
*IPPING sets the interval, in minutes, you want Keepalive to test the network
connection. To disable Keepalive, set *IPPING to 0 (default setting).
Note: The minimum time which can be set for Keepalive is fifteen minutes. If you set *IPPING for a
value less than the minimum, the minimum value will be set.
*IPPINGADDR sets the IP address you want to use for the connection test.
Caution: If *IPPINGADDR is left blank or is set to an invalid IP address (example, an IP which is
unreachable or one which is not a valid IP address), modem performance will be adversely
affected.
7.5.2 Data usage using Keepalive
Keepalive is an optional feature. If you frequently pass data with your modem,
you most likely do not need to have Keepalive enabled. When using Keepalive,
be aware that a ping moves approximately 66 bytes of data over the network,
and is billable by your cellular provider. The following *IPPING settings will incur
approximate monthly data usage in addition to any other data usage:
ProSoft Technology, Inc.
May 29, 2009
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
RLXIC-EH ♦ Intelligent Cellular
group.
THER
Page 59 of 111