Installing The Usb Driver - ProSoft Technology RLXIC-EH User Manual

RLXIC-EH ♦ Intelligent Cellular
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
6.2

Installing the USB driver

6.2.1 Set the Port Type
Virtual Ethernet port is the default setting for the USB port. If you want to install
the virtual serial port, change the USB port configuration using the directions
above.
6.2.2 Connect the RLXIC-EH to your computer's USB port
When you connect the RLXIC-EH for the first time to a USB port on your
computer, Windows should detect a new device, and prompt you to install the
driver.
Note: Windows will see each port type as a different USB device, and will see every port on your
computer separately. If you change the port type on the RLXIC-EH or connect to a different USB
port on your computer or hub, Windows will see it as a new device.
1 To start the install of the USB virtual Ethernet driver, select No, not this time,
and click Next.
2 Select Install from a list of specific location, and click Next.
Page 38 of 111
Universal Serial Bus (USB)
User Manual
ProSoft Technology, Inc.
May 29, 2009