ProSoft Technology RLXIC-EH User Manual page 32

RLXIC-EH ♦ Intelligent Cellular
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
3 Click the W
Wait for the "Write Successful" message.
4 Reset the modem.
Caution: Many of the configuration settings will not take effect until the modem has been reset.
Tip: You can use common settings on one modem to configure those same settings on another
modem even of a different type. For example, you can use the Ethernet settings of a modem (such
as RLXIC-EH) to configure the Ethernet settings of another RLXIC-EH. Settings not applicable to
the modem on which you are loading the template, will be discarded.
5.2.3 Optional: Applying one template to several modems
simultaneously with AceNet
AceNet allows you to connect to and monitor several modems at the same time.
For your convenience, you can also apply a single template to selected modems
simultaneously.
Connecting to the modems with AceNet is covered in the AceNet User Guide.
Caution: When applying a template in AceNet, it is even more important to make sure there are no
non-general settings in the template from the "master" modem.
Unlike AceManager, AceNet does not check the modem type before applying the
template. Settings not applicable, such as a USB setting from a RLXIC-EH
template being applied to a modem of a different type, are not read by the
receiving modem. You will get a "partial success" status if all items in a template
cannot be applied by the receiving modem.
1 Select modems to configure with the template.
Page 32 of 111
button on the toolbar to write the configuration to the modem.
RITE
Configuring your RLXIC-EH
User Manual
ProSoft Technology, Inc.
May 29, 2009