Activating Rlxic-Eh On Your Cellular Provider; Installing The Sim - ProSoft Technology RLXIC-EH User Manual

Activating RLXIC-EH on your cellular provider

User Manual
3 Activating RLXIC-EH on your cellular provider
In This Chapter

Installing the SIM................................................................................... 17

Configuring the APN.............................................................................. 19
This chapter provides step-by-step directions for activating your RLXIC-EH on
your cellular provider's network.
3.1 Installing the SIM
The Subscriber Identity Module (SIM) in the RLXIC-EH is a smartcard that
securely stores the key identifying a cellular subscriber. Generally, you will only
need to install a SIM once in the life of the modem, and it may be pre-installed by
your ProSoft Technology Representative.
3.1.1 Before you start
If the SIM was pre-installed, activation of your modem is complete.
Cellular Account Required
Cellular Account Required - To use your modem, you need to have an
active account with a data plan.
Software Required
AceManager - Graphical interface for entering most AT Commands. You can
download AceManager from the ProSoft Technology website: www.prosoft-
technology.com. A default installation of this utility is assumed later in these
directions
Hardware Required
Ethernet cable - An Ethernet cable
OR
USB cable - A USB 2.0 A/Mini-B Cable
Note: Until you install a driver for the USB port, you cannot use your USB port to configure the
modem.
Power adapter and a power source - You will need a power supply and
power source for the modem.
PC or laptop - To configure the modem, you will need a computer .
ProSoft Technology, Inc.
May 29, 2009
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
RLXIC-EH ♦ Intelligent Cellular
Page 17 of 111