Table of Contents
Advertisement
Universal Serial Bus (USB)
User Manual
6.3
Using the Virtual Ethernet Port
After the driver is installed, you can use the USB port just like a standard
Ethernet port.
6.3.1 Using USB Ethernet with AceManager
In AceManager, use the UDP or TCP connection, and enter the IP address of the
modem (
192.168.13.31
6.3.2 Using USB Ethernet with a Terminal Emulation Utility
Configure your terminal application for telnet communication.
1
In HyperTerminal, select TCP/IP (Winsock)
2
Use the IP address of the modem (
destination, and use the telnet port of the modem (
3
Enter the modem password (
ProSoft Technology, Inc.
May 29, 2009
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
by default), and the password (
192.168.13.31
by default) when requested.
12345
RLXIC-EH ♦ Intelligent Cellular
by default).
12345
by default) as the
by default).
2332
Page 45 of 111
Advertisement
Table of Contents
Need help?
Do you have a question about the RLXIC-EH and is the answer not in the manual?
Questions and answers