ProSoft Technology RLXIC-EH User Manual page 35

Configuring your RLXIC-EH
User Manual
Note: You can also connect using the virtual USB serial port. Refer to Using the USB virtual serial
port with a Terminal Emulation Utility (page 46) for more information on configuring and using the
virtual serial port.
2 Type in
192.169.13.31
3 Change the "Port Number" to
4 Click OK.
Connected
1 Type and press E
AT
2 To see what you are typing as you type it, you will need to turn on the echo
and verbose mode. Type
3 If you get a reply of "
get a reply of "
ProSoft Technology, Inc.
May 29, 2009
RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
for Host Address.
.
2332
. You should get a reply of "
NTER
and press E
ATE1V1
", then you entered the command successfully. If you
OK
" or " ", try entering the command again.
0 ERROR
RLXIC-EH ♦ Intelligent Cellular
" or " ".
OK 0
.
NTER
Page 35 of 111