Chapter 3 - Installing Devices; Removing The Chassis Cover - DFI TPC121 User Manual

Chapter 3 - Installing Devices

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it has been powered-
off.
2. Disconnect all power cords and cables.
3. The 8 mounting screws on the rear side of the system are used to secure the cover to the
chassis. Remove these screws and then put them in a safe place for later use.
4. After removing the mounting screws, lift the cover up.
Chapter 3 Installing Devices
Chapter 3
Mounting Screw
Lift the Cover Upward
5. The memory socket, expansion slots, Mini PCIe slot and SATA drive bay are readily acces-
sible after removing the chassis cover.
Mini PCIe Slot
TPC150/ TPC170
SATA drive bay
15
TPC121
SODIMM socket
SATA drive bay
SODIMM socket
Mini PCIe slot
www.dfi .com