DFI TPC121 User Manual page 41

3. While supporting the mounting screw at the bottom, from the top side of the board, fasten
a bolt into the screw.
4. The SDVO connector is located at the bottom of the daughterboard. Grasping the daugh-
terboard by its edges, position it on top of the motherboard's SDVO connector with its
mounting holes aligned with the bolt on the motherboard. This will also align the SDVO
connector of the two boards to each other.
Chapter 5 Ports and Connectors
Chapter 5
Bolt
SDVO connector at the bottom side
of the daughterboard
41
5. Press the daughterboard down firmly until it is completely seated on the SDVO connector
of the motherboard.
6. Use the provided mounting screw to secure the daughterboard to the motherboard.
SDVO connector on the
motherboard
Daughterboard
Motherboard
Mounting screw
www.dfi .com