DFI TPC121 User Manual page 48

Boundary 1 to Boundary 4
The range is from 0-127.
Speed Count 1 to Speed Count 5
The range is from 1-100.
Case Open Beep
Set this fi eld to Enabled to allow the system to alert you of a chassis intrusion event.
Chapter 7 BIOS Setup
Chapter 7
CPU Configuration
This section is used to configure the CPU. It will also display the detected CPU information.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
CPU Configuration
Intel (R) Core (TM) i7-3770 CPU @ 3.40GHz
CPU Signature
Microcode Patch
Max CPU Speed
Min CPU Speed
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Hyper-threading
Active Processor Cores
Intel Virtualization Technology
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Hyper-threading
Enable this field for Windows XP and Linux which are optimized for Hyper-Threading
technology. Select disabled for other OSes not optimized for Hyper-Threading technology.
When disabled, only one thread per enabled core is enabled.
Active Processor Cores
Number of cores to enable in each processor package.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabilities
provided by Vanderpool Technology.
48
Enabled for Windows XP
and Linux (OS optimized
for Hyper-Threading
306a8
Technology) and Disabled
10
for other OS (OS not
3400 MHz
optimized for
1600 MHz
Hyper-Threading
3400 MHz
Technology). When
4
Disabled only one thread
Supported
per enabled core is
Supported
enabled.
Supported
→ ←:
Supported Select Screen
↑↓:
Select Item
32 kB x 4 Enter: Select
+/ -:
32 kB x 4 Change Opt.
256kB x 4 F1: General Help
8192 kB F2: Previous Values
F3: Optimized Defaults
[Enabled] ESC: Exit
[All]
[Disabled]
www.dfi.com