LCD/Inverter Power Connector
Pins
1
2
3
Panel Inverter Brightness Voltage Control
Panel Power
4
5
Panel Backlight On/Off Control
6
7
8
Chapter 5 Ports and Connectors
Function
GND
GND
+3.3V
+12V
+12V
Chapter 5
Installing the SDVO-LVDS Daughterboard onto the
Motherboard (optional)
Important:
The motherboard used in this section is for reference purpose only and may not
resemble your motherboard. These illustrations are mainly to guide you on how to
install SDVO-LVDS onto the motherboard of your choice.
1. The photo below shows the location of the mounting hole on the motherboard.
2. Insert the provided mounting screw into the mounting hole - from the bottom through the
top of the motherboard.
40
Mounting hole
Mounting screw
Mounting hole
www.dfi .com