DFI TPC121 User Manual page 18

3. Align the mounting holes of the SATA drive with the mounting holes on the HDD bracket and
then use the provided mounting screws to secure the drive in place.
HDD bracket ket
Mounting screw
4. Place the SATA drive (with HDD bracket) back into place. Align the mounting holes on the
HDD bracket with the mounting holes on the SATA drive bay and then use the provided mounting
screws to secure the drive in place.
Mounting hole
Chapter 3 Installing Devices
Chapter 3
SATA drive
Mountin Mounting screws
HDD bracket
5. Connect one end to the SATA data connector on the SATA drive and the other end to the SATA
data connector on the system board.
18
Mounting hole
Mounting screw
www.dfi .com