Chapter 3 - Installing Devices
Removing the Chassis Cover
1.
Make sure the system and all other peripheral devices connected to it have been powered off.
2.
Disconnect all power cords and cables.
3.
The 8 mounting screws on the rear side of the system are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
Mounting screw
4.
Lift the cover up to open the system.
Lift the cover upward
Chapter 3 Installing Devices
Chapter 3
5.
The Mini PCIe and the microSD slots are readily accessible after removing the chassis cover.
Mini PCIe slot
Mounting screw
11
Mini PCIe slot
microSD socket
www.dfi.com