DFI TPC121 User Manual page 55

Enabled PEG
To enable or disable the PEG.
Memory Information
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
Memory Information
Memory RC Version 1.5.0.0
1333 Mhz
Memory Frequency
Total Memory 4096 MB (DDR3)
DDR3 slot 1 Not Present
DDR3 slot 2 4096 MB (DDR3)
CAS Latency (tCL) 9
Minimum delay time
CAS to RAS (tRCDmin) 9
Row Precharge (tRPmin) 9
Active to Precharge (tRASmin) 24
XMP Profile 1
Not support
XMP Profile 2
Not support
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
ME Subsystem
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset
Intel ME Subsystem Configuration
ME FW Version 8.0.4.1441
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Chapter 7 BIOS Setup
Chapter 7
→ ←:
Select Screen
↑↓:
Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC: Exit
→ ←:
Select Screen
↑↓:
Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC: Exit
55
Boot
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security
Boot Configuration
Setup Prompt Timeout
1
Bootup NumLock State
[On]
Quiet Boot
[Disabled]
CSM16 Module Version
07.69
Boot Option Priorities
 CSM Parameters
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Setup Prompt Timeout
Selects the number of seconds to wait for the setup activation key. 65535(0xFFFF) denotes
indefinite waiting.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on wherein the function of the numeric keypad is the
number keys. When set to Off, the function of the numeric keypad is the arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Save & Exit
Number of seconds to
wait for setup activation
key.
65535(0xFFFF) means
indefinite waiting.
← →:
Select Screen
↑↓:
Select Item
Enter: Select
+/ -: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC: Exit
www.dfi.com