DFI TPC121 User Manual page 65

MyGuard Hardware Monitor
1. Locate for the MyGuard
folder in the provided disc.
2. In the MyGuard folder,
right-click on the "setup"
file.
3. Select Run As Administrator.
4. Double-click Setup.
Important:
Perform steps 1-3 only when using Windows 7 or Windows Vista.
5. Setup is ready to install the
utility. Click Next.
Chapter 8 Supported Software
Chapter 8
6. Click Install to begin instal-
lation.
7. Setup is currently installing
the utility.
8. After completing instal-
lation, click Finish to exit
setup.
65
www.dfi.com