Press the "Select" key next to
the setting you would like to
change until the desired set-
ting appears on the display.
or
If you are required to enter
digits, press the "Select" key
next to the corresponding
line.
Change the setting using the
"Control" (up/down) keys.
With multi-digit settings, use
the "Control" (left/right) key
to move the cursor to the de-
sired place.
To finish digit entry, press
the "Select" key once more,
next to the corresponding
line.
To finish inputting, press
"Stop" several times.
Settings
The display will show the current
setting.
The cursor will blink. Move the
cursor a few times and the previ-
ous setting will be deactivated.
The display will count up or
down.
The cursor will blink at the de-
sired place.
The cursor will stop blinking.
The display will return to the orig-
inal state.
30