Message Function - TIPTEL 309 Operating Instructions Manual

Message function

The message function allows a caller who knows the message code
to leave a message, even when your tiptel 309 is set to play a non-
recordable announcement. When your tiptel 309 is set to play a re-
cordable announcement, the message function gives the caller the
possibility to skip past the announcement.
Instructions on how to configure your message code can be found
in the "Settings" section.
Call your tiptel 309 from an-
other phone.
Start input by pressing the

star key.
Enter the message code with
the telephone keypad. If you
make a mistake, you can go
back using the star key, and
start again.
To accept the code that you

have entered, press the hash
key.
Leave your message and fi-
nally replace the receiver.
The telephone from which you use the message function must

be set up for tone dialling (MFV).
Message function
You will hear the announcement.
The announcement will stop.
An automated voice after each
digit will confirm its recognition.
The device will then prompt you
to speak. If an incorrect code in
entered, your tiptel 309 will
switch off immediately.
23