Switching on and off
Make sure there is enough recording memory available. You
can delete all messages or individual ones, whichever the case
may be.
Press "Select" to choose
your desired announcement.
To switch on: Press "On/Off".
You can set the volume by
using the volume control.
Switching on and off
15
The announcement will appear at
the bottom-right of the display.
The LED will light up. With a non-
recordable announcement, two
lines will appear, representing the
number of messages. The num-
ber of calls you have received will
flash while the answering ma-
chine is dealing with the call.
If the caller's phone numberumb-
er is known, the display will
change and the caller's number
will appear on it for the duration
of the call.
You can then listen to incoming
messages. You can lift the re-
ceiver at any time while the mes-
sage is recording to speak direct-
ly to the person telephoning you.
The LED will flash if there are any
new messages.