Recording An Announcement - TIPTEL 309 Operating Instructions Manual

Recording an announcement

Press "Select" to choose
your desired announcement.
Press and hold "Announce-

ment".
Start speaking (speak into
the microphone from a dis-
tance of about 15 cm).
To pause the recording, re-

lease the "Announcement"
key.
To continue recording, press

and hold "Announcement"
once more.
To cancel the recording,
press "Stop".
Use the "Select" key next to
the corresponding line to
choose whether you want the
announcement to be record-
able or not.
Announcements
The announcement will appear at
the bottom-right of the display.
Wait until you hear a short beep.
Then "Recording.." will appear on
the display.
The display will show how many
minutes and seconds you have
been speaking for.
"Recordable" and "Non-
recordable" will appear on the
display.
Recording will continue.
The recording will be deleted.
Recording is complete and the
announcement will play again for
you to check. You will hear one
beep at the end of a recordable
announcement. You will hear two
beeps at the end of a non-
recordable announcement.
13