TIPTEL 309 Operating Instructions Manual page 10

Socket with several slots
1 Plug the existing telephone into the socket (slot F).
2 Insert the power supply unit with the small connector into the
"POWER" jack and then insert the power supply unit into a 230V
wall socket.
3 Insert the TAE adaptor into a free end of the connection cable.
4 Insert the second free end of the connection cable into the
"LINE" jack, and insert the TAE adaptor into the socket (slot N).
In Austria, slot F corresponds to this symbol:

corresponds to this symbol:
in place of the TAE adaptor.
In Switzerland, a T+T83 A12 socket should be used, into which

you should insert the enclosed T+T connection cable. If re-
quired, use an A6 adaptor in place of an A12 adaptor.
Service
. Use the enclosed TST adaptor
10
and slot N