C-Marking - Acculab ATL-224 Operating Instructions Manual

C Marking
The balance complies with the following EC Directives and
European Standards:
Council Directive 89/336/EEC
"Electromagnetic compatibility (EMC)"
Applicable European Standards:
Limitation of emissions:
In accordance with product standard EN 61326-1 Class B
(residential area)
Defined immunity to interference:
in accordance with product standard EN 61326-1
(minimum test requirements,
non-continuous operation)
Important Note:
The operator shall be responsible for any modifications
to Acculab equipment and must check and, if necessary,
correct these modifications.
56
On request, Sartorius will provide information on the
minimum operating specifications (in accordance with
the Standards listed above for defined immunity to
interference).
73/23/EEC "Electrical equipment designed for
use within certain voltage limits"
Applicable European Standards:
EN 60950
Safety of information technology equipment including
electrical business equipment
EN 61010
Safety requirements for electrical equipment for measure-
ment, control and laboratory use Part 1: General require-
ments
If you use electrical equipment in installations and under
ambient conditions requiring higher safety standards,
you must comply with the provisions as specified in the
applicable regulations for installation in your country.