C Marking - Acculab ECL6 Operating Instructions Manual

C Marking

The scale complies with the following EC Directives and
European Standards:
Directive 2004/108/EC:
"Electromagnetic compatibility (EMC)"
EN 61326-1 Electrical equipment for measure-
ment, control and laboratory use
EMC Requirements
Part 1: General requirements
Defined immunity to interference:
Industrial areas, continuous,
unmonitored operation
Limitation of emissions:
Residential areas, Class B
Important Note:
The operator shall be responsible for any modifications
to Acculab equipment or connections of cables not supplied
by Acculab and must check and, if necessary, correct these
modifications.
On request, Acculab will provide information on the
minimum operating specifications (in accordance with
the Standards listed above for defined immunity to
interference).
Directive 2006/95/EC:
"Electrical equipment designed for use within
certain voltage limits"
Applicable European Standards:
EN 61010 Safety requirements for electrical
measurement, control, and laboratory
equipment
Part 1: General requirements
If you use electrical equipment in installations and under
ambient conditions subject to stricter safety standards than
those described in the manual, you must comply with the
provisions as specified in the applicable regulations for
installation in your country.
31