Acculab ATL-224 Operating Instructions Manual page 34

Example: Determining animal weight with automatic start and 20 subweighing operations (measurements)
Parameter settings: Applic. AnimalW. (menu code 2. 7.)
Step
1. Place animal weighing bowl on the balance
2. Tare the balance
3. Change the number of subweighing operations:
4. Set number of measurements:
In increments of 1 (1, 2, 3, etc. to 100)
In increments of 10 (10, 20, etc. to 100)
5. Confirm number of measurements and start
automatic animal weighing.
The number of measurements remains stored
in battery-backed memory until the setting is changed
6. Place first animal in bowl.
The balance delays the start of measure
ments until the difference between 2
measurements meets the criterion
$ If you selected the manual start mode, press
7. Read off the result
The result is displayed with the
"*" symbol (= calculated value)
and remains displayed until the sample
(animal) is removed from the load plate (bowl)
8. Unload the balance
9. Weigh next animal (if desired)
Next weighing series begins automatically
* On some models, the keypad overlay shows the German word "MENUE" for MENU.
34
Key (or instruction)
(TARE)
(MENU)*
Repeatedly:
(MENU)* Press briefly
or (MENU)* and hold
(ENTER)
(ENTER)
Display/Data output
22.6 g
0.0 g
ref 30
ref 20
+ 0.0 g
*
888
20
19
....
1
+ 410.1 g
G *
mDef 20
x-Net + 410.1 g
+ 0.0 g
*