Acculab ATL-224 Operating Instructions Manual page 30

Example: Determining residual weight in percent
Parameter settings: Applic. Percent (menu code 2. 4.)
Reference percentage: Ref 100%
Step
1. Tare the balance
2. Place sample equal to 100%
on the balance
(in this example: 111.6 g)
3. Information:
Enter reference percentage
(Changing the reference: see the previous page)
4. Initialize the balance
The current reference weight
remains stored until a new
reference is set or the power supply is interrupted
5. Remove sample (e.g., for drying)
6. Place unknown weight on balance
(in this example: 105.9 g)
7. If desired, print percentage
8. Toggle display between
weight and percentage
9. Clear display of residual weight
and reference percentage
10. If desired, print net residual weight
* On some models, the keypad overlay shows the German word "MENUE" for MENU.
30
Key (or instruction)
(TARE)
(MENU)*
(MENU)*
(PRINT)
Repeatedly:
(MENU)*
(CLEAR)
(PRINT)
Display/Data output
0.0 g
ref 100 %
+ 100.0 %
*
pRef 100 %
Wxx% + 111.6 g
+ 94.9 %
*
Prc + 94.9 %
+ 105.9 g
*
+ 94.9 %
*
+ 105.9 g
N + 05.9 g