Mass Unit Conversion - Acculab ATL-224 Operating Instructions Manual

Mass Unit Conversion

Purpose
With this application program you can change the weight
value displayed from the basic weight unit to any of 4
application weight units (see table on next page).
Preparation
§ Select the Unit application for toggling weight units:
see chapter on "Configuration" (Parameter Settings)
§ Set the following parameters:
Applic.ation program
Toggle wt, unit
dec.plcs. Display accuracy
o All
minus1
o = Factory setting
Printout for Wt. Unit Toggling
+ 100.0 g
N + 0.22046 lb
13-Jan-2005 08:35
N + 3.5275 ozt
All decimal places
Reduced by 1 place
: Weight with 16-character data output format
: Weight with 22-character data output format
: Data output format for two-line printout:
: Date/time and weight
Features
– Set the basic unit and display accuracy in the Setup menu:
see "Configuration."
– Set the application weight units and display accuracies in
the Application menu.
– These settings are stored in battery-backed memory.
– The basic unit is active when the balance is powered up.
41