Acculab ATL-224 Operating Instructions Manual page 10

L
R
L
10
Leveling the Balance
Purpose:
– To compensate for unevenness at the place of installation
Always level the balance again any time after it has been moved to a different
location. Only the 2 front feet are adjusted to level the balance.
R
§ Retract the two rear feet (only on models with a rectangular weighing pan).
§ Turn the 2 front feet as shown in the diagram until the air bubble is centered
L
within the circle of the level indicator.
> In most cases this will require several adjustment steps.
R
§ On models with a rectangular weighing pan: Lower the 2 rear feet until they
touch the surface on which the balance rests.
Anti-theft Locking Device
§ To secure the balance at the place of installation, fasten a chain or a lock to the
lug located on the rear panel of the balance.
$ Anti-theft locking device (chain and lock): order number LC-1