Net-Total Formulation - Acculab ATL-224 Operating Instructions Manual

Net-total Formulation

Display symbol: R
Purpose
With this application program you can weigh in individual
components either by their individual weight or by the total
weight. You can print out both the total weight and the indi-
vidual weights of the components.
Preparation
§ Select the Net-total application in the menu:
see "Configuration."
§ Set the following parameters:
Applic. Application program
Net-TotL. Net-total formulation
Comp.Prt. Printout of components
Off
o On
o = Factory setting
Features
– Weigh up to 99 components from "0" to a defined total
component weight.
– Store component weights
(printout shows
"Comp xx"
– display zeroed automatically after value is stored, and
– automatic printout
– Clear component memory following cancellation of the
weighing sequence (by pressing) and printout of the total
weight.
– Toggling between component weight and total weight by
pressing and holding (MENU)*.(< 2 sec).
– Printout of the total of the individual component weights
( )
T-Comp
Printout: Net-total formulation
Comp 2+ 278.1 g
T-Comp+2117.5 g
* On some models, the keypad overlay shows the German
word "MENUE" for MENU.
with
: Second component
: Sum of components
35