Using The Scsiselect Utility Program (Some Models); Starting The Scsiselect Utility Program; Scsiselect Menu Choices - IBM IntelliStation E Pro Type 6216 User Manual

To enable Broadcom NetXtreme Gigabit Ethernet Boot Agent, complete the following
steps:
1. From the Configuration/Setup Utility main menu, select Devices and I/O Ports
2. Select System Board Ethernet PXE/DHCP and use the Right Arrow (→) key to
3. Select Save Settings and press Enter.

Using the SCSISelect Utility program (some models)

SCSISelect is a menu-driven configuration utility program that you can use for models
that come with a SCSI adapter. You can use this program to:
•
•
•
The following sections provide instructions for starting the SCSISelect Utility program
and descriptions of the menu choices.

Starting the SCSISelect Utility program

Complete the following steps to start the SCSISelect utility program:
1. Turn on the computer.
2. When the <<< Press <CTRL><A> for SCSISelect Utility! >>> prompt appears,
3. When the Would you like to configure the host adapter or run the SCSI
4. Use the arrow keys to select a choice from the menu.
5. Follow the instructions on the screen to change the settings of the selected items,

SCSISelect menu choices

The following choices appear on the SCSISelect Utility menu:
•
and press Enter.
set it to Enabled.
View the default SCSI IDs
Locate and correct configuration conflicts
Perform a low-level format on a SCSI hard disk
press Ctrl+A.
Note: If an administrator password has been set, you are prompted to type the
password to start the SCSISelect Utility program.
disk utility? question appears, make your selection and press Enter.
• Press Esc to return to the previous menu.
• Press the F5 key to switch between color and monochrome modes (if your
monitor permits).
and press Enter.
Configure/View Host Adapter Settings
Select this choice to view or change the SCSI controller settings. To reset the
SCSI controller to its default values, press F6; then, follow the instructions that
appear on the screen.
Chapter 3. Configuring your computer
27