Diagnostic Error Message Tables - IBM IntelliStation E Pro Type 6216 User Manual

Complete the following steps to view the test log:
1. Insert the IBM Enhanced Diagnostics diskette or the Device Drivers and IBM
2. Shut down your operating system and restart the computer.
3. If a user password is set, the system prompts you for it. Type the password, and
4. Run the appropriate diagnostics program and when the Diagnostic Programs
5. Select View Test Log from the list that appears; then follow the instructions on the
6. Save the test log to a file on a diskette or to your hard disk.

Diagnostic error message tables

The following tables provide descriptions of the error messages that might be listed in
the test log after you run the diagnostic programs.
Important: If error messages are displayed that are not listed in the following table,
make sure that your computer has the latest level of BIOS code installed.
Code Function Result
001 Core system Failed
005 Video port
011 Serial port
014 Parallel port
015 USB interface Aborted
Failed
020 PCI interface Failed
030 SCSI interface Failed
175 System thermal Failed
180 Status display Failed
82
IBM IntelliStation E ProTypes 6216 and 6226:User's Guide
Enhanced Diagnostics CD.
press Enter.
screen appears, select Utility.
screen.
Note: The system maintains the test-log data while the system is turned on.
When you turn off the power to the computer, the test log is cleared.
Text message
System board, ECC Test
System board
System board
Integrated serial port
Integrated parallel port
Can NOT test USB interface while it is in use.
Note: If you have a USB keyboard or mouse
attached, you cannot run the diagnostic
program for the USB interface.
System board
System board
SCSI adapter in slot n failed register/counter/ power
test
(where n is the slot number of the failing adapter)
Fan # n
(where n is the number of the failing fan)
Temperature sensed on system board is out of range
Any failure message
Action
Call for service.
1. Turn off the computer.
2. Replace the USB
keyboard and mouse
with a standard
keyboard and mouse.
3. Turn on the computer.
4. Run the diagnostic test
again.
Call for service.
Call for service.
See the information
provided with the adapter
for instructions.
If the problem remains, call
for service.
Replace the indicated fan.
Call for service.
Call for service.