Using Passwords - IBM IntelliStation E Pro Type 6216 User Manual

•
•
•
•
•

Using passwords

The System Security choice appears only on the full Configuration/Setup Utility
menu. After you select this choice, you can implement an administrator password.
24
IBM IntelliStation E ProTypes 6216 and 6226:User's Guide
— Sleep Mode
You can set this menu choice only if Time to Low Power is set.
— Power Switch < 4 sec.
You can set this to Power Off or Suspend.
— System wake-up event
Select this choice to control the event that occurs when the computer wakes
up.
— Serial Port Ring Detect
Set this menu choice to Enabled to set the server to wake up when activity is
detected on the serial port modem.
— Wake Up on Alarm
Select this choice to set the computer to wake up at a certain day or time. You
can set this to Disabled, Time, and Date/Time.
— Alarm Day of Month
You can set this menu item only if you have set Wake Up on Alarm to Time or
Date/Time. Set the day of the month for the computer to wake up.
— Alarm Time
You can set this menu item only if you have set Wake Up on Alarm to Time or
Date/Time. Set the time of the day for the computer to wake up.
— ACPI Sleep State
Select which power level your computer uses in Standby mode. If you select
S1, power is maintained to all devices, but all processor activity is halted. If
you select S3, power is maintained only for the main memory. Exit from the
S3 state might not be supported by all installed adapters.
— Restart on AC/Power Failure
This field controls whether the system will stay on after ac power is removed
and then restored. Select Power On if you use a power strip to turn on the
computer. Select Stay Off if you want the computer to remain off after power
is restored. Select Last State to have the computer return to its previous
state.
Error Logs
Select this choice to view any errors that occur during POST.
Save Settings
Select this choice to save your customized settings.
Restore Settings
Select this choice to restore the previous settings.
Load Default Settings
Select this choice to restore the factory settings.
Exit Setup
Select this choice to exit from the Configuration/Setup Utility program.
If you have made any changes, the program will prompt you to save the changes
or exit without saving the changes.