IBM IntelliStation E Pro Type 6216 User Manual page 66

10. If you have another adapter to install, repeat steps 1 through 11 on page 37 If you
11. Reinstall the rear-adapter-support bracket; then, rotate the bracket to the closed
12. Return the drive-bay cages to their original positions in the computer.
13. Replace the cover. See "Replacing the cover:" on page 46 for details.
14. Reconnect the external cables and power cords; then, turn on the attached
Installing a SCSI adapter: Complete the following steps to install an optional SCSI
adapter:
1. Complete steps 1 through 11 of "Installing an adapter:" on page 36; then, continue
2. Connect the SCSI signal cable to the adapter and one or more of the signal cable
3. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED
4. If you have other adapters or options to install or remove, do so now.
5. Reinstall the rear adapter support bracket; then, rotate it to the closed (locked)
6. Replace the cover. See "Replacing the cover:" on page 46 for details.
7. Reconnect the external cables and power cords; then, turn on the attached
Installing internal drives:
read various types of media and store data in different formats. Your computer comes
with the following drives preinstalled:
•
•
•
Internal drive bays: The IntelliStation E Pro Type 6226 computer comes with a 3.5-
in., 1.44-MB diskette drive in bay 1; a hard disk drive installed in bay 2; and an IDE
CD-ROM, DVD-ROM, or CD-RW drive in bay 3.
52
IBM IntelliStation E ProTypes 6216 and 6226:User's Guide
have another option to install, do so now. Otherwise, complete the rest of the
steps in this section.
(locked) position.
devices and the computer.
with step 2.
connectors to the rear of the SCSI devices.
connector on the system board. See "System board" on page 33 for the location
of the SCSI LED connector.
position.
devices and the computer.
Diskette
Hard disk
CD-ROM, DVD-ROM, or CD-RW
Different types of drives enable your computer to