Crestron Cameo C2NI-CB Series Operations & Installation Manual page 35

Crestron C2N/C2NI-CB Series
Operations & Installation Guide - DOC. 6346C
"Address Book" Window – Serial Setup
2. After setting the correct parameters, click OK to return to the
Crestron Toolbox main window.
3. Click Tools | Network Device Tree View, or click the network
device tree icon
Serial on COM1 from the drop down list if it is not already
selected. If communication is successful, the network devices
that are connected to the control system are displayed.
Network Device Tree
To view a specific device, expand the network device tree by
clicking the +. Expand the network device tree till the device to be
to display the devices in the system. Select
Cameo Keypads: C2N/C2NI-CB Series • 31
Cameo Keypads