Related Manuals for Crestron Cameo INET-CBDEX Series
Summary of Contents for Crestron Cameo INET-CBDEX Series
- Page 1 Crestron INET-CBDEX Series ® Cameo Wireless Keypads with ® infiNET EX Operations & Installation Guide...
- Page 2 Important Safety Instructions • Read these instructions. WARNING: • Keep these instructions. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, • Heed all warnings. DO NOT EXPOSE THIS APPARATUS TO RAIN OR • Follow all instructions. MOISTURE. THE APPARATUS SHALL NOT BE EXPOSED •...
- Page 3 Regulatory Compliance This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. As of the date of manufacture, the INET-CBDEX-230 have been tested and found to comply with specifications for CE marking. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
- Page 4 Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
-
Page 5: Table Of Contents
Reference Documents ....................29 Further Inquiries ......................29 Future Updates ......................29 Return and Warranty Policies ....................30 Merchandise Returns / Repair Service ..............30 Crestron Limited Warranty ..................30 Operations & Installation Guide - DOC. 6992D Contents • 1... -
Page 7: Cameo Wireless Keypads With Infinet Ex: Inet-Cbdex Series
(120, 230, or 277 volt), communicating via the infiNET EX wireless control network to allow full keypad functionality with true feedback as ® part of a complete Crestron control system. The INET-CBDEX-E and INET-CBDEX-P are functionally identical. For simplicity within this guide, the term “INET-CBDEX” is used except where noted. - Page 8 Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Cameo wireless keypads are available in the following models. Models – 120 V Keypads DESCRIPTION MODEL NUMBER COLOR INET-CBDEX-E INET-CBDEX-E-A-S Almond Smooth Cameo Express Wireless INET-CBDEX-E-B-S Black Smooth Keypad with infiNET EX...
- Page 9 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Models – 230 V Keypads DESCRIPTION MODEL NUMBER COLOR INET-CBDEX-230-E INET-CBDEX-230-E-A-S Almond Smooth Cameo Express Wireless INET-CBDEX-230-E-B-S Black Smooth Keypad with infiNET EX INET-CBDEX-230-E-W-S White Smooth INET-CBDEX-230-P INET-CBDEX-230-P-A-S Almond Smooth Cameo Wireless Keypad...
- Page 10 Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Models – 277 V Keypads DESCRIPTION MODEL NUMBER COLOR INET-CBDEX-277-P INET-CBDEX-277-P-A-S Almond Smooth Cameo Wireless Keypad INET-CBDEX-277-P-A-T Almond Textured with infiNET EX INET-CBDEX-277-P-B-S Black Smooth INET-CBDEX-277-P-B-T Black Textured INET-CBDEX-277-P-BRN-S Brown Smooth INET-CBDEX-277-P-DA-S...
-
Page 11: Features And Functions
Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Features and Functions • Stylish and versatile wall mount keypad • Standard electrical box installation • Color matched finishes • 12 color matched smooth and textured finishes • Versatile combinations of two to eight push buttons •... - Page 12 Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Auto-Dimming Backlight High-quality backlit laser-engraving (sold separately) provides customizable button text that is easy to read under any lighting condition. A built-in light sensor* controls the backlight intensity automatically to achieve a crisp, legible appearance in both darkened and fully lit rooms.
- Page 13 Cameo wireless keypads work together with other infiNET EX devices like our 120 V Cameo wireless in-wall dimmers and switches, communicating with a Crestron control system via the infiNET EX wireless gateway (sold separately). Up to 100 infiNET EX devices may...
-
Page 14: Specifications
Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Specifications Specifications for the INET-CBDEX keypads are listed in the following table. INET-CBDEX Specifications SPECIFICATION DETAILS Wireless RF Transceiver infiNET EX 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15;... - Page 15 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX INET-CBDEX Specifications (Continued) SPECIFICATION DETAILS Environmental Temperature 32º to 113º F (0º to 45º C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 1 Btu/h Construction Plastic Chassis Mounts in a 1-gang or larger electrical...
- Page 16 Cameo Keypads with infiNET EX Crestron INET-CBDEX Series INET-CBDEX Specifications (Continued) SPECIFICATION DETAILS CB6-BTN (1) Small Backlit Engravable Button [A,B,BRN,DA, Cap, Smooth (specify color) GRY,IVR,W]-S CB6-BTN (1) Small Backlit Engravable Button [A,B,DSK,LAT,W]-T Cap, Textured (specify color) CB6E-BTN (1) Small Engravable Button Cap,...
-
Page 17: Physical Description
Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Physical Description This section provides information on the connections, controls, and indicators available on the INET-CBDEX keypads. The following illustrations show the INET-CBDEX-P with five single- row button caps and one row of small split-row button caps, two triple- row button caps, and two double-row button caps and two rows of small split-button caps. - Page 18 INET-CBDEX Keypad Physical Views (INET-CBDEX-P Shown with Faceplate, Not Included) Button caps are laser engravable, designed with Crestron Engraver software. The engraving software provides a single line of up to 10 characters, including spaces, for single-button caps, two lines of characters on double and triple-button caps, and a single line of up to four characters for small split-button caps.
- Page 19 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX INET-CBDEX Overall Dimensions (Front, Side, and Rear Views) (INET-CBDEX-P Shown) 3.81 in (97 mm) 4.13 in 2.78 in 3.28 in (105 mm) (71 mm) (84 mm) 1.49 in (38 mm) 1.75 in (45 mm) 1.87 in...
- Page 20 Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Connectors, Controls, and Indicators CONNECTORS, DESCRIPTION CONTROLS, AND INDICATORS LED Indicators Feedback: (6) LEDs, one per each of six small button positions; Programmable, auto-dimmable, adjustable intensity, 10 blinking patterns Bar Graph: (1) 6-segment bar...
- Page 21 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Connectors, Controls, and Indicators (Continued) CONNECTORS, DESCRIPTION CONTROLS, AND INDICATORS LINE (1) Captive screw terminal, line power input NEUTRAL (1) Captive screw terminal Ground (1) Captive screw terminal 1. Feedback LEDs are green on the INET-CBDEX-E and white on the INET-CBDEX-P.
-
Page 22: Setup
RF ID. The RF ID is a 2-digit hexadecimal number that can range from 03 to 6C. The RF ID of the unit, set using Crestron Toolbox™, must match the RF ID specified in the SIMPL Windows program. - Page 23 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Assemble the keypad as described in the following steps. Refer to the accompanying illustration. 1. Arrange the button caps in position on the rear housing assembly according to the program plan. NOTE: A single button cannot be installed in the lowest position of the keypad.
- Page 24 Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Use the following procedure to install the keypad in a standard, 1-gang electrical box (not supplied). NOTE: Installation must be in accordance with National Installation codes. 1. Turn ac power off. 2. Connect the ac power cable to the line, neutral, and ground INET-CBDEX screw terminals following all local and state codes.
- Page 25 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Installation into Electrical Box (INET-CBDEX-P Shown) Light Sensor* Holes(s) Screws (2) #6-32 x 7/8" 4. Attach the desired decorative-style faceplate (not supplied). 5. Turn ac power on. * INET-CBDEX-P only. Operations & Installation Guide - DOC. 6992D...
-
Page 26: Joining An Infinet Ex Network
To acquire an INET-CBDEX, perform the following: 1. Put the infiNET EX gateway into Acquire mode from the unit itself or from Crestron Toolbox, as described in its manual, available at www.crestron.com/manuals. NOTE: In an environment where multiple gateways are installed, only one gateway should be in the Acquire mode at a time. -
Page 27: Verifying Communications Status
Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Verifying Communications Status To check the communications status of the device, tap the top button three times then press and hold it down (tap-tap-tap-press+hold) for less than 2 seconds. The top LED indicates the communications status. Refer to the following table for details. -
Page 28: Button Arrangement
Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Button Arrangement The following illustrations show the basic arrangement of the buttons on the keypad. Button caps for the INET-CBDEX are supplied as loose button covers: a set of five single-button caps, three double-button caps, two triple-button caps, and two pairs of small split-row button caps. - Page 29 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX A single-button cap placed in any position activates the covered button position. A small split-row button cap placed in either of the bottom two positions activates the covered button position. When a two- or three- button cap is used to cover multiple button positions, the bottom button position is activated.
-
Page 30: Uploading And Upgrading
(including the FTP site). Establishing Communication Use Crestron Toolbox for communicating with the INET-CBDEX; refer to the Crestron Toolbox help file for details. There are three methods of communication, all using indirect communication. Indirect Communication (With a Control System) Control... - Page 31 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Establish communications between the PC and the control system as described in the 2-Series Control Systems Reference Guide (Doc. 6256). Indirect Communication (Without a Control System) TI VI -R SW M PU...
-
Page 32: Programs And Firmware
Crestron Studio™ help file, SIMPL Windows help file, or the Crestron Toolbox help file. If a Crestron Studio (or SIMPL Windows) program is provided, it can be Crestron uploaded to the control system using Crestron Studio (or SIMPL Studio or Windows) or Crestron Toolbox. -
Page 33: Ambient Light Sensor Operation
Crestron INET-CBDEX Series Cameo Keypads with infiNET EX Ambient Light Sensor Operation The INET-CBDEX Series keypads have an ambient light sensor* that can be used to automatically configure the backlight to operate in either Day mode or Night mode. Backlight operation is based on ambient light level and a programmed threshold. -
Page 34: Problem Solving
Cameo Keypads with infiNET EX Crestron INET-CBDEX Series Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. INET-CBDEX Troubleshooting TROUBLE POSSIBLE CORRECTIVE CAUSE(S) ACTION Keypad is not Check circuit breaker. -
Page 35: Reference Documents
[1-888-273-7876] or, for assistance within a particular geographic region, refer to the listing of Crestron worldwide offices at www.crestron.com/offices. To post a question about Crestron products, log onto Crestron’s Online Help at www.crestron.com/onlinehelp. First-time users must establish a user account to fully benefit from all available features. -
Page 36: Return And Warranty Policies
(property or economic damages inclusive) arising from the sale or use of this equipment. Crestron is not liable for any claim made by a third party or made by the purchaser for a third party. - Page 37 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX This page is intentionally left blank. Operations & Installation Guide - DOC. 6992D Cameo Keypads with infiNET EX • 31...
- Page 38 Cameo Keypads with infiNET EX Crestron INET-CBDEX Series This page is intentionally left blank. 32 • Cameo Keypads with infiNET EX Operations & Installation Guide - DOC. 6992D...
- Page 39 Crestron INET-CBDEX Series Cameo Keypads with infiNET EX This page is intentionally left blank. Operations & Installation Guide - DOC. 6992D Cameo Keypads with infiNET EX • 33...
- Page 40 Crestron Electronics, Inc. Operations & Installation Guide – DOC. 6992D 15 Volvo Drive Rockleigh, NJ 07647 (2027651) Tel: 888.CRESTRON 03.14 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.