Programming With Crestron Systembuilder Or D3 Pro - Crestron Cameo C2NI-CB Series Operations & Installation Manual

Cameo Keypads
Programming with Crestron SystemBuilder or
D3 Pro
The easiest
Crestron SystemBuilder offers automatic programming for such
method of
residential and commercial applications as audio distribution, home
programming,
but does not theater, video conferencing, and lighting. The interface of this tool guides
offer as much
you through a few basic steps for designating rooms and specifying the
flexibility
control system, touchpanels, devices, and functionality. Crestron
as SIMPL
Windows.
SystemBuilder then programs the system, including all touchpanel
projects and control system logic.
24 • Cameo Keypads: C2N/C2NI-CB Series
• (Optional) SystemBuilder version 2.0 or later with
SystemBuilder Templates version 2.0.1or later. Requires the
following software versions:
o PC with Windows 2000 or XP
o SIMPL Windows version 2.06.20 or later with library
update file 352 or later. Requires SIMPL+ Cross Compiler
version 1.1.
o Crestron database 17.3.3 or later
o Vision Tools Pro-e 3.3.4.0 or later
o Crestron Toolbox 1.01.11 or later
o Engraver 2.5 or later
• (Optional) D3 Pro version 2.0 or later with D3 Pro Templates
1.0 or later. Requires the following software versions:
o PC with Windows 2000 or XP
o SIMPL Windows version 2.06.20 or later with library
update file 352 or later.
o Crestron database 17.3.3 or later
o Vision Tools Pro-e 3.3.4.0 or later
o Crestron Toolbox 1.01.11 or later
o Engraver 2.5 or later
o CUZ 3.137 for 2-Series processors or later
• Crestron Engraver version 2.5 (required if using SystemBuilder
or to produce custom labeling for the buttons).
Crestron C2N/C2NI-CB Series
Operations & Installation Guide - DOC. 6346C