Crestron Cameo C2NI-CB Series Operations & Installation Manual page 2

Hide thumbs Also See for Cameo C2NI-CB Series:

Table of Contents

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

The specific patents that cover Crestron products are listed at patents.crestron.com.

Crestron, the Crestron logo, Cameo, Cresnet, Crestron Toolbox, D3 Pro, SIMPL+, SystemBuilder, and

VT Pro-e are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States

and/or other countries. Windows is a trademark or registered trademark of Microsoft Corporation in the

United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used

in this document to refer to either the entities claiming the marks and names or their products. Crestron

disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in

typography or photography.

This document was written by the Technical Publications department at Crestron.

Table of Contents

Cameo c2n-cb series Cameo c2n-cbf Cameo c2n-cbd Cameo c2ni-cbuk