Summary of Contents for Crestron black nova AXES Series
Page 1
AXES Keypads (Crestron®) User Manual A Tribute to Minimalist Aesthetics of the 20th Century. Its natural elegance elicits straight lines, simple shapes, vivid colors and perfect glass surfaces are a stylish match for any interiors. Its bespoke look and precise performance create an experience of pure comfort and aesthetic pleasure. The AXES Hospitality collection is available in different control configurations also with RFID card reader.
AXES Crestron® Keypad Panels Manual – V1.1 Index Important Notes ................................. 2 Legal Principles ..............................2 Scope of Applicability ............................2 Safety information ..............................3 Important Information ............................3 Please note ................................3 Safety precautions ..............................4 Introduction ................................5 Included in the box ..............................
AXES Crestron® Keypad Panels Manual – V1.1 Important Notes To ensure fast installation and start-up of the units, we strongly recommend that the following information and explanations are carefully read and adhered to. Legal Principles Subject to Change Black Nova reserves the right to make any alterations or modifications that serve to increase the efficiency of technical progress.
AXES Crestron® Keypad Panels Manual – V1.1 Safety information Important Information Read these instructions carefully before trying to install, configure, or operate products. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
AXES Crestron® Keypad Panels Manual – V1.1 Safety precautions WARNING HAZARD OF INCORRECT INFORMATION Do not incorrectly configure the product, as this can lead to incorrect reports and/or data results. Do not base your maintenance or service actions solely on messages and information displayed by the software.
AXES Crestron® Keypad Panels Manual – V1.1 Introduction The AXES® Collection A Tribute to Minimalist Aesthetics of the 20th Century. A Tribute to Minimalist Aesthetics of the 20th Century. Its natural elegance elicits straight lines, simple shapes, vivid colors and perfect glass surfaces are a stylish match for any interiors. Its bespoke look and precise performance create an experience of pure comfort and aesthetic pleasure.
AXES Crestron® Keypad Panels Manual – V1.1 Included in the box Back End box 1. AXES Back End Front End box 1. Support Frame Protection Cover 2. Support Frame (BN) (quantity according to the Front End size) 3. Spacer for Socket Frame (quantity according to the Front End type and size) 4.
AXES Crestron® Keypad Panels Manual – V1.1 Installation Keypad panel front side Please refer to the following pictures to identify the touch panel’s buttons and indicators. Card Holder with/without RFID reader RFID reader Numeric Keypad DHBECRC / DHBECHC DHBEDRC DHBENK*...
3 – Service button 4 – Cresnet® communication bus 5 – Temperature and Humidity Sensor Keypad panel wiring As per the Crestron® standard the wiring is done according to the following drawing: WAGO 243-211 WAGO 243-212 Wiring with 24V power...
Page 10
AXES Crestron® Keypad Panels Manual – V1.1 The WAGO 243-211 terminal, carrying the 24V power supply, must be plugged into the connector “A” and the WAGO 243-212, carrying the communication, into the connector “B” as shown at side. Cable for application is UTP CAT 5 (Without shielding) WARNING ●...
AXES Crestron® Keypad Panels Manual – V1.1 Required back box types UK 3x3 Standard Back Box (mm) FR Dry Lining Steel Back Box (mm) EU 2M Standard Back Box (mm) Please note: • Back box depth must comply with specific installed socket (shaver, ethernet plug, phone plug, USB ports, etc.)
AXES Crestron® Keypad Panels Manual – V1.1 Programming the keypad The AXES Crestron® keypad version is configured using the Crestron® SIMPL application. BLACKNOVA-KEYPAD device is present under Crestron® Devices - Wired Keypads section and ready to add to your Crestron® SIMPL...
Page 14
AXES Crestron® Keypad Panels Manual – V1.1 The default value is 500d Analog input: Used for decreasing of the buttons backlight when the device is in the sleep mode. <Sleep_Mode_Backlight> The valid values range is from 0d [%] to 100d [%].
Page 15
AXES Crestron® Keypad Panels Manual – V1.1 Analog input: The temperature value in degrees Fahrenheit multiplied by 10 to be shown on the <Temperature_F> display. It is visible on the screen when <Display_Selection> is set to 6d. The valid values range is from 0d to 999d, that represents 0.0F...99.9F degrees.
Check the cable termination pinout and polarity • Check the integrity of the cable • Check the keypad panel configuration Crestron® SIMPL application Check that keypad panel has the proper ID configured • Check that keypad panel received configuration from the network •...
AXES Crestron® Keypad Panels Manual – V1.1 Warranty exclusion The Warranty does not apply in the following cases • Damage caused by accident, flood, fire, earthquake, abuse, misuse, neglect, or other external causes. • Damage caused by improper use or inappropriate operating conditions including unstable connection, poor grounding, external electromagnetic fields, exposure to direct sunlight, high humidity, or vibration.