4.5.1
Flow temperature set point ( )
The required flow temperature is adjustable from 20 to 90 °C.
4.5.2
Pump run on time HTG ( )
Pump run on time can be adjusted (Please refer to installation
contractor)
- Press the " " -key until the digit
"code"-display.
- Press the "
"-key until the digit
"code"-display.
- Set the required value, using the [+] and [-] -keys.
Code
25/01/2011 - 300014883-001-K
(with dot) appears in the
(with dot) appears in the
Description
Pump runs on for 10 seconds
Pump runs on for 1 to 15 minutes (
- Press the "
"-key to store the new value (value will flash twice).
- Press the "reset"-key to return to operating mode.
NOTE: For continuous pump operation use manual override,
See chapter 4.1.3.
=
to
Gas 110 Eco 115 / 65
)
19