Classification - REMEHA Gas 110 Eco 115 Installation, User And Service Manual

6.1.1

Classification

1
5
1 Flue type C
13:
Air/flue gas connection by means of concentric pipes to a horizontal
terminal (so-called forced flue)
2 Flue type C
33:
Air/flue gas connection by means of concentric pipes to a vertical
terminal (roof outlet)
3 Flue type C
93:
Air/flue gas connection by concentric pipes in the boiler room and
single pipes in the chimney (combustive air in counter current in the
chimney)
- Only factory components are authorised for connecting
the boiler and the terminal.
- The clear section must comply with the standard.
- The chimney must be swept before the installation of the
evacuation conduit.
4 Flue type C
93:
Air/flue gas connection by concentric pipes in the boiler room and
single "flex" in the chimney (combustive air in counter current in the
chimney)
5 Flue type C
53:
Air and flue gas connection separated by means of a bi-flow adapter
and single pipes (combustive air taken from outside)
6 Flue type B
23P:
Chimney connection (combustive air taken from the boiler room)
34
2
6 7 3 3 3
Gas 110 Eco 115 / 65
2
4
7 Flue type B
23P:
Cascade installation
Optional accessories:
Flue damper (depending on flue design)
For information about the connection to the electrical terminal block,
refer to the instructions delivered with package AM3
2
25/01/2011 - 300014883-001-K