2: Point Program; Detector Programming - Fire-Lite Alarms MS-9600LS Manual

Master Programming Level
3.6.2 Point Program
PROGRAMMING
The Point Program option allows the programmer to add a new addressable device to an SLC loop,
1=AUTOPROGRAM
delete an existing device from a loop or change the programming for an existing device. Pressing
2=POINT PROGRAM
3=ZONE SETUP 2, while viewing Programming Screen #1, will select the Point Program option and display the fol-
lowing screen:
Programming Screen #1
The programmer selects the desired SLC loop by pressing 1 or 2 in Point Program Screen #1,
which causes the panel to display the following screen:

Detector Programming

Pressing 1, while viewing Point Program Screen #2, will allow the programmer to add, delete or
change the programming of an addressable detector. The following screen will be displayed by the
control panel:

Pressing 1 while viewing the Detector Screen will display the following screen which allows the
programmer to add a new detector address to programming:
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
1=LOOP 1
2=LOOP 2
1=DETECTOR
2=MODULE
1=ADD
2=DELETE
3=EDIT
Add Detector
ENTER DETECTOR#
***
POINT PROGRAM
SELECT LOOP
Point Program Screen #1
POINT PROGRAM
SELECT TYPE
Point Program Screen #2
DETECTOR
Detector Screen
ADD DETECTOR
Add Detector Screen
Programming
67