Trouble Reminder; Banner - Fire-Lite Alarms MS-9600LS Manual

Master Programming Level
Pressing 2 for System Setup, while viewing Programming Screen #2, will cause the following
PROGRAMMING
1=LOOP SETUP screens to be displayed:
2=SYSTEM SETUP
3=VERIFY LOOPS
Programming Screen #2

Trouble Reminder

The Trouble Reminder features causes the control panel piezo to sound a reminder 'beep' for
alarms and troubles, after the panel has been silenced. Refer to "System Setup" on page 100, for a
detailed description of this feature. Pressing 1 while viewing System Setup Screen #1 will cause
the display to toggle to Trouble Rem On, which enables this feature. Each press of the 1 key will
cause the display to toggle between Trouble Rem On and Trouble Rem Off.

Banner

The top line of the display, which appears when the control panel is in normal mode, can be
changed by using the Banner option. Pressing 2 while viewing System Setup Screen #1 will cause
the following to be displayed:
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
SYSTEM SETUP
1=TROUBLE REM
2=BANNER
3=TIME-DATE
System Setup Screen #1
SYSTEM SETUP
1=TIMERS
2=NAC
3=RELAYS
System Setup Screen #2
SYSTEM SETUP
1=CANADIAN OPT.
2=WATERFLOW SIL.
System Setup Screen #3
BANNER
1=FACTORY
2=USER DEFINED
Banner Screen
Programming
OFF
OFF
NO
101