Fire-Lite Alarms MS-9600LS Manual page 191

NFPA 72 Remote Station Protective Signaling System
Notes:
1. Cut Jumper JP6 on the FACP main circuit board to supervise placement of the 4XTMF
module.
2. Refer to "4XTMF Transmitter Module Installation" on page 55 for detailed information.
Cutting TBL Jumper allows the
reverse polarity circuit to open with
a system trouble condition if no
alarm condition exists.
Figure C.4 Remote Station Connection Using 4XTMF Module
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
RS82 Remote Station Receiver UL listed.
Refer to Fire•Lite Alarms, Inc., Instruction Manual for Remote
Station Receiver Model RS82.
NFPA Standard-Specific Requirements
Polarity Shown is
+ -
Normal Standby
+
Power-limited
-

(Dummy load with a 4.7K , ¼ watt resistor
when no connection is made)
4XTMF Transmitter Module
191