Add Module; Delete Module - Fire-Lite Alarms MS-9600LS Manual

Master Programming Level
Pressing 1 for Control Module or 2 for Monitor Module will cause the following screen to be dis-
played:
The programmer can continue adding modules by pressing the ESC or left arrow key which will
return the display to the Add Module Screen #1.

Pressing 2 in the Modules Screen will display the Delete Module Screen which allows the program-
mer to delete a specific module:
MODULES
1=ADD
2=DELETE
3=EDIT
Modules Screen
A flashing cursor will appear in the position of the first asterisk to the left. Using the panel keypad,
key in the module address such as 005. When the last digit is keyed in, the following confirmation
that the module has been deleted will be displayed:

The programmer can change a modules existing or factory default programming by pressing 3 in
the Modules Screen. The following screen will be displayed:
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
MODULE#
IS ADDED

Delete Module

ENTER MODULE#
***
MODULE#
IS DELETED
Edit Module Screen for Monitor Module
ENTER MODULE ADDRESS
***

ADD MODULE

Add Module Screen #3
DELETE MODULE
Delete Module Screen
DELETE MODULE
EDIT MODULE
Edit Module Screen
005
005
Programming
79