Add Detector; Delete Detector - Fire-Lite Alarms MS-9600LS Manual

Programming
A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in
the three digit detector address, such as 005.
When the last digit is keyed-in, the following screen will be displayed:
Press the down arrow key to view additional choices. Press the number corresponding to the
desired selection to program that type to the newly added detector.
When the type has been selected, the following screen will be displayed:
The programmer can continue adding detectors by pressing the ESC or left arrow key which will
return the display to the Add Detector Screen.

Pressing 2 in the Detector Screen will display the Delete Detector Screen which allows the pro-
DETECTOR
grammer to delete a specific detector:
1=ADD
2=DELETE
3=EDIT
Detector Screen
A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in
the three digit detector address, such as 005. When the last digit is keyed-in, the following screen
will be displayed:
The programmer can continue deleting detectors by pressing the ESC or left arrow key which will
return the display to the Delete Detector Screen.
68
1=SMOKE(PHOTO)
2=USER-DEFINED-1
3=SMOKE(ION)
DETECTOR#
IS ADDED

Delete Detector

ENTER DETECTOR#
***
DETECTOR#
IS DELETED
DETECTOR TYPE

ADD DETECTOR

DELETE DETECTOR
Delete Detector Screen
DELETE DETECTOR
MS-9600LS Series Manual — P/N 52646:B2 2/12/2010
Master Programming Level
005
005