HP 2610 User Manual page 24

Enhancements
Release R.11.12 Enhancements
database: To configure a location for the lease database,
enter a URL in the format tftp://ip-addr/ascii-string. The
maximum number of characters for the URL is 63.
option
client packets that are being forwarded out trusted ports.
The default is yes
trust
on trusted ports are forwarded. Default: untrusted.
verify
hardware address field and the source MAC address must
be the same for packets received on untrusted ports or the
packet is dropped. Default: Yes
vlan
must be enabled already. Default: No
To display the DHCP snooping configuration, enter this command:
ProCurve(config)# show dhcp-snooping
An example of the output is shown below.
ProCurve(config)# show dhcp-snooping
DHCP Snooping Information
DHCP Snooping
Enabled Vlans
Verify MAC
Option 82 untrusted policy : drop
Option 82 Insertion
Option 82 remote-id
Store lease database : Not configured
Port Trust
----- -----
B1 No
B2 No
To display statistics about the DHCP snooping process, enter this command:
ProCurve(config)# show dhcp-snooping stats
An example of the output is shown below.
19
: Add relay information option (Option 82) to DHCP
, add relay information.
: Configure trusted ports. Only server packets received
Enables DHCP packet validation. The DHCP client
:
Enable DHCP snooping on a vlan. DHCP snooping
:
: Yes
:
: Yes
: Yes
: mac