Release R.11.17 Enhancements
For example, suppose you wanted to assign these DSCP policies to the packets identified by the
indicated UDP and TDP port applications:
Determine whether the DSCPs already have priority assignments, which could indicate use by
existing applications. (Also, a DSCP must have a priority configured before you can assign any
QoS classifiers to use it.)
Figure 5. Display the Current DSCP-Map Configuration
Configure the DSCP policies for the codepoints you want to use.
Figure 6. Assign Priorities to the Selected DSCPs
The DSCPs for this
example have not yet
been assigned an
802.1p priority level.
Configured in this Step