HP 2610 User Manual page 48

Version r.11.25 software procurve 2610 series

Enhancements

Release R.11.17 Enhancements

Operating Notes on Using Port Ranges

You can only have 6 concurrent policies when using unique ranges. The number of policies

■

allowed is lower if ACLs are also using port ranges.

You cannot have ranges that include any port numbers that have been configured as part of

■

another QoS application port number policy.

■

An error message is generated if there are not enough hardware resources available when

configuring a policy.

You must specify the entire range of configured port numbers when using the no form of the

■

command, for example:

ProCurve(config)# qos udp-port range 1300 1399

ProCurve(config)# no qos range 1300 1399

The following example shows the 802.1p priority for the UDP and TCP port prioritization:

Displays a listing of all TCP and UDP QoS classifiers

currently in the running-config file.

dscp 001110

TCP/UDP Port(s)

TCP Port 23 (Telnet)

UDP Port 23 (Telnet)

TCP Port 80 (World Wide Web HTTP)

UDP Port 80 (World Wide Web HTTP)

UDP ports 100-199

802.1p Priority for TCP

802.1p Priority for UDP

Table of Contents

Show quick links

Switch HP 263924-002 User Manual
Hewlett-packard ip console switch user guide (135 pages)
Switch HP ProCurve 2600-8-PWR Datasheet
Procurve switch 2600 series (9 pages)
Switch HP ProCurve 2650 Install Manual
Hp procurve 2650: install guide (86 pages)