Removing An Inter-Fabric Route; Add Tr Mapping Dialog; Tr Mapping Manager Dialog - HP StorageWorks 8/20q User Manual

• View detailed information for that TR mapping member in the Selected TR Mapping area
Figure 7

TR Mapping Manager dialog

After you click OK in the TR Mapping Manager dialog, the IFZs are created and saved to the switch. If
there is an active zone set with TR mappings, the old IFZs are deleted and replaced with the new IFZs, and
then the active zone set is re-activated. If there is no active zone set, a zone set named TR_MAPPING_SET"
(default name) is created, the new IFZs are added to the zone set, and then the zone set is activated. If
there are no TR mappings, the old IFZs are deleted from the active zone set, and then the active zone set is
re-activated. If there are no zones and no IFZs in the active set, the active zone set is deactivated.

Removing an inter-fabric route

To remove an inter-fabric route:
1. Open the faceplate display, and select Fabric > TR Mapping Manager.
2. In the TR Mapping Manager dialog
and then click Remove or select Edit > Remove.
A warning dialog prompts you to confirm the removal of the selected mapping members.
3. Click OK to confirm the removal of the selected TR mapping member.

Add TR Mapping dialog

The Add TR Mapping dialog
dialog displays the selectable local devices, remote devices, and TR-configured ports that can be mapped
to the inter-fabric zone. The Add TR Mapping dialog is displayed after you click Add or select Edit > Add
in the TR Mapping Manager dialog.
NOTE: You can map a remote device through multiple TR ports, as long as each of those TR ports are on
different 8/20q Fibre Channel Switches.
(Figure
(Figure 8) allows you to map a new inter-fabric zone. The Add TR Mapping
HP StorageWorks 8/20q Fibre Channel Switch QuickTools Switch Management User Guide
7), select a TR mapping member from the TR Mapping list,
23